The quarrel MDO 35 Small instantaneous water heater This is a compact solution for decentralized hot water supply at the washbasin. The device heats water directly as it flows through, thus avoiding standby and line losses such as those that occur with conventional small storage water heaters.
With its compact design, the instantaneous water heater is particularly suitable for:
Guest toilets
small bathrooms
handwashing basin
Under- or top-table mounting
Direct heating without a hot water storage tank
Economical use of water and energy
Bare wire heating system
Special aerator with flow limiter
Suitable for open/unpressurized systems
Under- and top-table mounting possible
Compact design
Energy efficiency class A
No standby power consumption
The water will be:
not saved
not preheated
only heated during the flow through the water
This results in:
lower heat losses
less energy consumption
shorter hot water routes
The integrated bare wire heating element:
reacts quickly
works efficiently
reduces heat loss
The included special aerator limits the flow rate to:
approx. 2 l/min
This saves additional water.
open/unpressurized fittings
Bathroom sink
Guest toilets
small handwashing stations
Under-table mounting
Top table mounting
Manufacturer: Zanker
Model: MDO 35
Power: 3.5 kW
Voltage: 230 V
Fuse: 16 A
Heating system: Bare wire
Control: hydraulic
Flow rate: 2 l/min
Maximum inlet temperature: 35 °C
Protection class: IP25
Energy efficiency class: A
Width: 19 cm
Height: 14.3 cm
Depth: 8.2 cm
Weight: 1.54 kg
1× Instantaneous water heater
1× Special aerator
Mounting material
Assembly & User manual
The instantaneous water heater operates on 230 V.Depending on the design, the connection is made as follows:
via safety plug
or
via fixed connection
For fixed connections, the installation should be carried out by a qualified electrician.
small washbasins
Guest toilets
energy-efficient hot water preparation
Households with low hot water requirements
space-saving installations
